S-O-30強制空氣循環高溫爐
Shear Testing OvenGet unmatched results when performing heat-fail temperature shear testing of hot melt and pressure sensitive adhesives with the ChemInstruments 8 Por 30 position Shear Test Oven. Thi
Shear Testing OvenGet unmatched results when performing heat-fail temperature shear testing of hot melt and pressure sensitive adhesives with the ChemInstruments 8 Por 30 position Shear Test Oven. Thi
Get unmatched results when performing heat-fail temperature shear testing of hot melt and pressure sensitive adhesives with the ChemInstruments 8 Por 30 position Shear Test Oven. This forced-ventilation shear test oven includes a ramping controller that complies with the SAFT test method ASTM D4498. The variability of SAFT tests depends on the mass in the oven, specific heat factors, wattage of the heating system, fan speed, program and operator technique.
The 8 or 30 Position Shear Test Oven is the result of ChemInstruments' development of a standard rack, controller and oven combination, which greatly aids in producing uniform results between laboratories using the system.
美國ChemInstruments 公司研制的S-O-8 or S-O-30 強制空氣循環持粘性能測試用高溫爐,適用于熱熔膠及壓敏膠在高溫條件下的性能測試,該機設計符合于SAFT 的 ASTM D4498測試標準. SAFT測試標準的制定取決于許多因素, 例如爐內物體體積,熱容系數, 加熱系統的功率, 風扇速度, 操作程序及技術等. S-O-8 or S-O-30 含有標準試架, 控制系統及組合化, 適用于各種類型的實驗室系統.
10 個不同升溫程序設置及控制, 具有15個分段及 30個步驟的設定功能；
測試架承受溫度400°F (204°C) 以下；
爐子最高溫度500°F (260°C), 需將測試架移出；
溫度維持在 +/-1% 誤差范圍內, 升溫可控制在 1 °F/分；
電源要求 120伏, 14安倍；
透明爐門；
附加部件可用于同時進行室溫測試；
